Omron ZS-MDC User Manual download pdf (Page 55)

Section 3 SETUP

Section 3

Setting I/O Assignments

3-17

ZS-MDC

User’s Manual

Changing Output Assignments

FUN mode-[I/O SET]-[I/O SET]-[OUT]

Changing Linear Output Assignments

FUN Mode-[I/O SET]-[I/O SET]-[ANALOG]

About Digital Output

FUN Mode-[I/O SET]-[I/O SET]-[DIGITAL]-[LOG1 to 9]

Setting Description

TASK1

TASK2

TASK3

TASK4

The measurement value of the task selected here is output as the judgment result

of the Multi-Controller.

Setting Description

TASK1

TASK2

TASK3

TASK4

The measurement value of the task selected here is linear-output from the Multi-

Controller.

Setting Description

NONE

Input A to input I

TASK1 to TASK4

Set this to batch-output multiple data to external devices using CompoWay/F or

non-procedural commands.

Assign to log 1 to 9 inputs A to I or TASK1 to 4 to be output. When a command is

input, the inputs or tasks are output continuously in order from log 1 to 9.

(The data of the nine channels can be batch-output when input A to I is set to log1

to 9 with all inputs assigned.)

For details on commands, refer to the “Communication Command Reference”

(provided separately).

When multi-channel waveforms are plotted or logging is performed on SmartMon-

itor Zero, the details set on SmartMonitor Zero are automatically reflected in this

setting.

▲▲ ▲

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 93 94

No comments

Omron ZS-MDC User Manual Page 55